If you are searching for Austin TX limestone sealers, then contact Texas Stone Sealers today. Our team of sealers will provide the most professional and experienced sealing services available. Natural stone needs to be clean and sealed in order to preserve its look and life. Austin, Texas is full of natural stone that homeowners and commercial clients should care about.

Texas Stone Sealers is capable of sealing stone patios, marble countertops, pool decks, porous stone, smooth stone, slate, granite, limestone, flagstone, and so much more. Above all, stone sealing is our specialty. It doesn’t matter what type of stone you have; our expert sealers in Austin can help.

Austin TX Limestone Sealers

Limestone is a very common type of stone and should be preserved like any other. So, Texas Stone Sealers will clean and seal your limestone and other natural stone surfaces. Stone cleaning is an important part of the sealing process. It helps removes dirt, bacteria, and other particles that may affect the sealant.

For our sealants to seal properly, we need to clean the surface first. Deep cleans with a pressure washer will help remove any stains, so they are not sealed into the stone. Texas Stone Sealers only uses the most advanced sealants on the market. In fact, we developed these advanced sealants ourselves because we were tired of using underperforming versions.

Limestone Sensitivity

Limestone is a very common sedimentary rock. It is composed of calcium carbonate and fossils of marine organisms. Limestone is a popular modern building material. Clients may have limestone for their driveways, patios, countertops, floors, pool decks, and sidewalks. Limestone is a stone that can last for years and years, but in residential areas, it takes a heavy toll. Everyday usage can wear this stone away piece by piece.

Clients need to be careful about what they are doing with their limestone, as some substances or actions can affect it significantly. Limestone is a soft stone, so highly acidic substances can affect the integrity of the stone. Marble is created from limestone, so in some ways, they have similar properties.

Marble is often used for countertops and floors. Substances like wine, juice, soda, tomato sauce, and coffee will damage marble significantly. Aggressive cleaning chemicals can also damage the stone, so homeowners need to be careful when it comes to marble and limestone. Deterioration will occur if the stone is not cared for, and these substances are left sitting. Even worse, stains will appear, making the stone look unsightly.

Brighten the look of your limestone with a cleaning and sealing.

If you want to clean your limestone, then you will need to be very careful about what you use. Harsh chemicals like bleach or vinegar will cause significant damage. Instead, simply use water and soap. Using a soft cloth rather than a hard brush is recommended, and if you use a hard brush, use it carefully. These steps will keep your stone looking good while preserving the look and integrity.

Seal Your Limestone Today

In order to preserve your limestone as long as possible, you need to seal it. Texas Stone Sealers’ sealants offer the best protection against spills, bacteria, stains, and more. Regardless of where your limestone is located, we will seal it outdoors and indoor. Limestone is an abundant building material and should be protected. Texas Stone Sealers has a wide range of sealers than can prevent stains, moisture absorption, deterioration, chipping, sanding, calcification, mold growth, and more.

Clients can see how well we do on Google, Angie’s List, and the Better Business Bureau. The reviews speak for themselves. Plus, you will benefit greatly from our proprietary sealants. All of our sealants use the most trusted formulas and take advantage of Cross-linking Technology (CLT). CLT is what creates the strong bond between the sealant and stone, so it stays looking immaculate.

Cross-Linking Technology (CLT)

Cross-linking Technology is a term used in the field of chemistry. It refers to two or more polymer chains linking together. It is these silicon-oxygen polymer chains that create a strong bond against moisture and stains. The polymer chains in the sealant connect to those in the stone, and an unbreakable matrix is formed. CLT is found in each of our sealants, which is why they get a seven-year warranty.

Limestone is a soft stone, so it can stain easily.

Commercial and residential clients can rest easy knowing their sealant has almost a decade-long warranty. We stand by our products and will continue to do so. If your sealant ever weakens, we will come back and seal it so it lasts as long as it should have the first time. Be sure to protect your limestone. It is not the strongest stone, so homeowners need to care for it.

Limestone is very absorbent, so rain, animal waste, accidental spills, and bacteria will affect the stone significantly. The last thing you want is your stone growing mold or algae. These growths can be prevented through our specialized Austin TX Limestone Sealers.

Benefits of Cross-Linking Technology

Cross-linking Technology offers several benefits to clients when they use our sealants. Firstly, their stone will look better than before. Our sealants protect against moisture, but they also brighten the color of your stone. Your stone will look better once our sealants have cured on your stone. Your guests will be impressed and your neighbors jealous.

Another benefit of CLT is clients save money and time. There is no need to reseal your stone a couple of years after the first time. Instead, you can continue to enjoy your sealed stone and that extra time and money. Choosing a cheap sealing company will only make you pay more time and money later down the road.